Dry Sand Making Process

At present, the protection of natural resources such as river sand has become a trend, and the use of river sand is no longer feasible. Only by increasing the production of mechanism sand and developing a related supply system can the sand and stone market imbalance be alleviated and the problem be solved fundamentally.

Dry sand-making technology is prevalent in areas where water sources are scarce. This process uses special sand-making methods to achieve results. At the same time, tower-type sand-making systems are gradually popular. Generally, the dry sand making process is completed by using a crusher (optional), a sand making machine (required), and a dust removal device, and the layout is relatively compact.

The selection of this process needs to pay great attention to and confirm the wind direction of the mine. This is because the soil layer of the mine rock is thick and contains a large amount of soil. The soil removal device is essential. At the same time, the wind speed and wind direction determine the contaminated area of the area. If the tower-type sand-making system is not used, the dry sand-making process can use the terrain direction cleverly, and the feeder and the coarse breaking equipment are set up on the slope.

Furthermore, the sand-making process has a certain effect on the site of the material pile. It is required that the site of the stockpile should be very hardened to prevent the soil from mixing into the bottom finished machine sand, which will lead to an increase in impurities in the sand and a decrease in quality.

Equipment

Case

Maybe You Want To Read